Show Monitor Session - Dell Force10 MXL Blade Reference Manual

show config
Display the current monitor session configuration.
show config
Syntax
Defaults
none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Command
Version 8.3.16.1
History
Example Figure 22-2. show config Command Example
FTOS(conf-mon-sess-11)#show config
!
monitor session 11
source TenGigabitEthernet 10/0 destination TenGigabitEthernet 10/47 direction
rx

show monitor session

Display the monitor information of a particular session or all sessions.
Syntax show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session command.
Parameters
session-ID
Defaults none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 22-3. show monitor session Command Example
FTOS#show monitor session 11
SessionID
---------
Related
monitor session
Commands
Introduced on M I/O Aggregator
Introduced on M I/O Aggregator
Source Destination
------ -------------
11 TenGig 10/0
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Direction
---------
TenGig 10/47 rx
Creates a session for monitoring.
Mode
-------
interface
Port Monitoring | 435