Dell Force10 MXL Blade Reference Manual page 413

Example Figure 21-9. show ip ospf database external Command Example
FTOS#show ip ospf 1 database external
LS age: 612
Options: (No TOS-capability, No DC, E)
LS type: Type-5 AS External
Link State ID: 12.12.12.2
Advertising Router: 20.31.3.1
LS Seq Number: 0x80000007
Checksum: 0x4cde
Length: 36
Network Mask: /32
Metrics Type: 2
TOS: 0
Metrics: 25
Forward Address: 0.0.0.0
External Route Tag: 43
LS age: 1868
Options: (No TOS-capability, DC)
LS type: Type-5 AS External
Link State ID: 24.216.12.0
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000005
Checksum: 0xa00e
Length: 36
Network Mask: /24
Metrics Type: 2
TOS: 0
Metrics: 1
Forward Address: 0.0.0.0
External Route Tag: 701
FTOS#
Table 21-5. show ip ospf process-id database external Command Description
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
Metrics Type
TOS
OSPF Router with ID (20.20.20.5) (Process ID 1)
Type-5 AS External
Description
Displays the LSA age.
Displays the optional capabilities available on router. The following options can
be found in this item:
• TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS
External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number enables you to identify
old or duplicate LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the external type.
Displays the TOS options. Option 0 is the only option.
Open Shortest Path First (OSPFv2) | 413