Show Vlan - Dell Force10 MXL Blade Reference Manual

•
•
•
A failed registration can occur for the following reasons:
•
•
Related
show gvrp
Commands

show vlan

Display the global VLAN configuration.
Syntax show vlan
EXEC
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 12-4. show vlan Command Example
The attribute that was being parsed had an invalid attribute length.
The attribute that was being parsed had an invalid GARP event.
The attribute that was being parsed had an invalid VLAN ID. The valid range is 1 - 4095.
Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP
Blocking state).
An entry for a new GVRP VLAN could not be created in the GVRP database.
Introduced on MXL 10/40GbE Switch IO Module
FTOS# show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status
* 1 Active
G 10 Active
leanred vlan)
FTOS#
Displays the GVRP configuration.
Description Q Ports
U Te 3/20
U Te 5/20-21
G Po128(Te 5/49) (dynamically
GARP VLAN Registration (GVRP) | 225