Show Running-Config Monitor Session - Dell Force10 MXL Blade Reference Manual

show running-config monitor session

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Usage
Information
Related
Commands
436 | Port Monitoring
Display the running configuration of all monitor sessions or a specific session.
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use just the
monitor session command.
session-ID
none
EXEC
EXEC Privilege
Version 8.3.16.1 Introduced on M I/O Aggregator
Figure 22-4. show running-config monitor session Command Example
FTOS#show running-config monitor session
!
monitor session 8
source TenGigabitEthernet 10/46 destination TenGigabitEthernet 10/1 direction rx
!
monitor session 11
source TenGigabitEthernet 10/0 destination TenGigabitEthernet 10/47 direction rx
FTOS#show running-config monitor session 11
!
monitor session 11
source TenGigabitEthernet 10/0 destination TenGigabitEthernet 10/47 direction rx
The monitoring command is saved in the running configuration at the Monitor Session mode level and
can be restored after a chassis reload.
monitor session
show monitor session
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Creates a session for monitoring.
Displays a monitor session.
show running-config