Dell Force10 MXL Blade Reference Manual page 468

bandwidth-percentage
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
class-map
Syntax
Parameters
Defaults
Command Modes
Command
History
468 | Quality of Service (QoS)
Assign a percentage of weight to class/queue.
bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage command.
percentage
none
CONFIGURATION (conf-qos-policy-out)
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and will disable the
scheduling of that class. If the sum of the bandwidth percentages given to all four classes exceeds
100%, the bandwidth percentage will automatically scale down to 100%.
qos-policy-output
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality of
service policies to each class.
class-map { match-all | match-any } class-map-name [ layer2 ]
match-all
match-any
class-map-name
layer2
Layer 3
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Enter the percentage assignment of weight to class/queue.
Range: 1 to 100% (granularity 1%)
Creates a QoS output policy.
Determines how packets are evaluated when multiple match criteria exist.
match-all
Enter the keyword
the match criteria in order to be considered a member of the class.
Determines how packets are evaluated when multiple match criteria exist.
match-any
Enter the keyword
least one of the match criteria in order to be considered a member of the
class.
Enter a name of the class for the class map in a character format (32
character maximum).
layer2
Enter the keyword to specify a Layer 2 Class Map.
Default: Layer 3
to determine that the packets must meet all
to determine that the packets must meet at