Service Timestamps - Dell Force10 MXL Blade Reference Manual

Usage If there is a change in the configuration, FTOS prompts you to save the new configuration. Or you can
Information
save your running configuration with the copy running-config command.
Related
redundancy
Commands
disable-auto-reboot
send
Send messages to one or all terminal line users.
Syntax send [ * ] | [ line ] | [ console ] | [ vty ]
Parameters
*
line
console
vty
Defaults none
Command Modes
EXEC
Command
Version 8.3.16.1
History
Usage
Messages can contain an unlimited number of lines; however, each line is limited to 255 characters. To
Information
move to the next line, use the <CR>. To send the message use CTR-Z, to abort a message use CTR-C.

service timestamps

Add time stamps to debug and log messages. This command adds either the uptime or the current time
and date.
Syntax
service timestamps [ debug | log ] [ datetime [ localtime ] [ msec ] [ show-timezone ] | uptime ]
Parameters
debug
log
datetime
localtime
msec
show-timezone
uptime
Resets any designated stack member except the management unit.
Enter the asterisk character
Send a message to a specific line.
Range: 0 to 11
Enter the keyword
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
severity 0 to 6.
(OPTIONAL) Enter the keyword
to the message.
(OPTIONAL) Enter the keyword
timestamp.
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
information in the timestamp.
(OPTIONAL) Enter the keyword
elapsed since system reboot.
*
to send a message to all tty lines.
console
to send a message to the Primary terminal line.
vty
to send a message to the Virtual terminal
debug
to add timestamps to debug messages.
log
to add timestamps to log messages with
datetime
to have the current time and date added
localtime
to include the localtime in the
msec
to include milliseconds in the timestamp.
show-timezone
to include the time zone
uptime
to have the timestamp based on time
Control and Monitoring | 55