Example; Debug Spanning-Tree Rstp - Dell Force10 MXL Blade Reference Manual

Command Modes
Command
History
Related
Commands

debug spanning-tree rstp

Syntax
Parameters
Command Modes
Command
History

Example

description
Syntax
520 | Rapid Spanning Tree Protocol (RSTP)
CONFIGURATION RSTP (conf-rstp)
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
protocol spanning-tree rstp
Enable debugging of RSTP and view information on the protocol.
debug spanning-tree rstp [all | bpdu interface { in | out } | events]
To disable debugging, use the no debug spanning-tree rstp command.
all
(OPTIONAL) Enter the keyword
|
bpdu interface { in (OPTIONAL) Enter the keyword
out }
(OPTIONAL) Enter the interface keyword along with the type slot/port of the interface
you want displayed. Type slot/port options are the following:
•
•
•
Optionally, enter an in or out parameter in conjunction with the optional interface:
•
•
events
(OPTIONAL) Enter the keyword
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 28-1. debug spanning-tree rstp bpdu Command Example
FTOS#debug spanning-tree rstp bpdu tengigabitethernet 2/0 ?
in Receive (in)
out Transmit (out)
Enter a description of the rapid spanning tree
description { description }
To remove the description, use the no description {
Enters rapid spanning tree mode
all
bpdu
For a Port Channel interface, enter the keyword
number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
in
For Receive, enter
out
For Transmit, enter
events
description
to debug all spanning tree operations.
to debug Bridge Protocol Data Units.
port-channel
TenGigabitEthernet
fortyGigE
to debug RSTP events.
} command.
followed by a
followed by the