Show Interfaces Port-Channel - Dell Force10 MXL Blade Reference Manual

Related
group
Commands

show interfaces port-channel

show config
Display the current configuration of the selected LAG.
Syntax show config
Command Modes INTERFACE PORTCHANNEL
Example Figure 14-41. show config Command Sample Output for a Selected LAG
FTOS(conf-if-po-1)#show config
!
interface Port-channel 1
FTOS(conf-if-po-1)#
Command
Version 8.3.16.1
History
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [ channel-number ] [ brief ]
Parameters
channel-number
brief
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
no ip address
shutdown
Introduced on MXL 10/40GbE Switch IO Module
Groups two LAGs in a supergroup ("fate-sharing group").
Displays information on configured Port Channel groups.
Introduced on MXL 10/40GbE Switch IO Module
For a Port Channel interface, enter the keyword
number:
Range: 1-128
(OPTIONAL) Enter the keyword
number, the state of the port channel, and the number of interfaces in the port
channel.
port-channel
brief
to display only the port channel
followed by a
Interfaces | 281