Dell Force10 MXL Blade Reference Manual page 417

Example Figure 21-11. show ip ospf process-id database opaque-area Command Example
(Partial)
FTOS>show ip ospf 1 database opaque-area
LS age: 1133
Options: (No TOS-capability, No DC, E)
LS type: Type-10 Opaque Link Area
Link State ID: 1.0.0.1
Advertising Router: 10.16.1.160
LS Seq Number: 0x80000416
Checksum: 0x376
Length: 28
Opaque Type: 1
Opaque ID: 1
Unable to display opaque data
LS age: 833
Options: (No TOS-capability, No DC, E)
LS type: Type-10 Opaque Link Area
Link State ID: 1.0.0.2
Advertising Router: 10.16.1.160
LS Seq Number: 0x80000002
Checksum: 0x19c2
--More--
Table 21-7. show ip ospf process-id database opaque-area Command Description
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Opaque Type
Opaque ID
Related
show ip ospf database
Commands
OSPF Router with ID (3.3.3.3) (Process ID 1)
Type-10 Opaque Link Area (Area 0)
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following
options can be found in this item:
• TOS-capability or No TOS-capability is displayed depending on
whether the router can support Type of Service.
• DC or No DC is displayed depending on whether the originating router
can support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS
External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the advertising router's ID.
Displays the Fletcher checksum of the an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the Opaque type field (the first 8 bits of the Link State ID).
Displays the Opaque type-specific ID (the remaining 24 bits of the Link
State ID).
Displays OSPF database information.
Open Shortest Path First (OSPFv2) | 417