Advertise Dot1-Tlv; Advertise Dot3-Tlv - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
advertise dot1-tlv
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
advertise dot3-tlv
Syntax
Parameters
Defaults
Command Modes
Command
History
356
|
Link Layer Discovery Protocol (LLDP)
Advertise dot1 TLVs (Type, Length, Value).
advertise dot1-tlv
{
port-protocol-vlan-id | port-vlan-id | vlan-name
To remove advertised dot1-tlv, use the
vlan-name
} command.
port-protocol-vlan-id
port-vlan-id
vlan-name
Disabled
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Version 8.3.16.1
protocol lldp (Configuration)
debug lldp interface
show lldp neighbors
show running-config lldp
Advertise dot3 TLVs (Type, Length, Value).
advertise dot3-tlv
{
max-frame-size
To remove advertised dot3-tlv, use the
max-frame-size
Enter the keyword
none
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Version 8.3.16.1
no advertise dot1-tlv
port-protocol-vlan-id
Enter the keyword
VLAN identification TLV.
port-vlan-id
Enter the keyword
TLV.
vlan-name
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
Enables LLDP globally.
Debugs LLDP.
Displays the LLDP neighbors.
Displays the LLDP running configuration.
}
no advertise dot3-tlv
max-frame-size
to advertise the dot3 maximum frame size.
Introduced on MXL 10/40GbE Switch IO Module
}
{
port-protocol-vlan-id | port-vlan-id |
to advertise the port protocol
to advertise the port VLAN identification
to advertise the vlan-name TLV.
{
max-frame-size
} command.
Advertisement
Table of Contents
