Command
Version 8.3.16.1
History
stop jump-start
Cancel the jump-start reload process.
Syntax
stop jump-start
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Usage
This command stops the jump-start process while the reload is in progress. However, if the system is
Information
downloading an FTOS image or configuration file, the process is stopped AFTER the DHCP release is
sent.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Bare Metal Provisioning | 145