Dell Force10 MXL Blade Reference Manual page 486

Example
test cam-usage
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
486 | Quality of Service (QoS)
Figure 25-10. show qos wred-profile Command Example
FTOS#show qos wred-profile
Wred-profile-name
wred_drop
wred_ge_y
wred_ge_g
wred_teng_y
wred_teng_g
WRED1
Check the Input Policy Map configuration for the CAM usage.
test cam-usage service-policy input policy-map stack-unit { [ number] | [all ]}
policy-map
stack-unit number
stack-unit all
none
EXEC
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 25-11. test cam-usage service-policy input policy-map stack-unit all Command
Example
FTOS# test cam-usage service-policy input pmap_l2 stack-unit all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
Stack-unit Status| Portpipe | CAM Partition | Available CAM | Estimated CAM| Status
| |
0 0
0 1
1 0
1 1
13 1
FTOS#
Note:
In a Layer 2 Policy Map, IPv4 rules are not allowed and hence the output contains only
L2ACL CAM partition entries.
min-threshold max-threshold
0 0
1024 2048
2048 4096
4096 8192
8192 16384
2000 7000
Enter the policy map name.
(OPTIONAL) Enter the keyword stack-unit followed by the stack-unit
number.
(OPTIONAL) Enter the keywords
units.
|
L2ACL 500
L2ACL 100
L2ACL 1000
L2ACL 0
...
...
...
L2ACL 400
stack-unit all
to indicate all stack
| per Port | (Allowed ports)
200 Allowed (2)
200
200 Allowed (5)
200
200 Allowed (2)
Exception
Exception