Clear Qos Statistics - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Usage
Packets arriving at the input interface are checked against the match criteria, configured using this
Information
command, to determine if the packet belongs to that class. This command accesses the CLASS-MAP
mode, where the configuration commands include match ip and match mac options.
Related
ip access-list extended
Commands
ip access-list standard
match ip access-group
match ip precedence
match ip dscp
match mac access-group
match mac dot1p
match mac vlan
service-queue
show qos class-map
clear qos statistics
Clears matched packets, matched bytes, and dropped packets.
Syntax
clear qos statistics interface-name .
Parameters
interface-name
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Usage
When you issue this command, statistical information stored regarding QoS is cleared and reset to 0.
Information
These statistics can be accessed using the show qos statistics command in EXEC mode. When the
traffic pattern matches the QoS classification criteria flows, the corresponding counters are
incremented.
Related
show qos statistics
Commands
Configures an extended IP ACL.
Configures a standard IP ACL.
Configures the match criteria based on the access control list (ACL)
Identifies IP precedence values as match criteria
Configures the match criteria based on the DSCP value
Configures a match criterion for a class map, based on the contents of the
designated MAC ACL.
Configures a match criterion for a class map, based on a dot1p value.
Configures a match criterion for a class map based on VLAN ID.
Assigns a class map and QoS policy to different queues.
Views the current class map information.
Enter one of the following keywords:
•
For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
Introduced on MXL 10/40GbE Switch IO Module
Displays the qos statistics.
followed by the slot/port information.
followed by the slot/port information.
Quality of Service (QoS) | 469
Advertisement
Table of Contents
