Track Ip - Dell Force10 MXL Blade Reference Manual

Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands

track ip

Syntax
Parameters
Defaults
Command Modes
Command
History
352 | Layer 2
interface
Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
All interfaces in Layer 2 mode are untagged.
INTERFACE VLAN
Version 8.3.16.1
When you use the no tagged command, the interface is automatically placed in the default VLAN as
an untagged interface unless the interface is a member of another VLAN. If the interface belongs to
several VLANs, you must remove it from all VLANs to change it to an untagged interface.
Tagged interfaces can belong to multiple VLANs, while untagged interfaces can only belong to one
VLAN at a time.
interface vlan Configures a VLAN.
untagged Specifies which interfaces in a VLAN are untagged.
Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member
interfaces.
track ip interface
To remove the tracking feature from the VLAN, use the no track ip
interface
Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
number:
Range: 1 to 128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
Not configured
INTERFACE VLAN
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
port-channel
followed by a number:
TenGigabitEthernet
fortyGigE
followed by the
interface command.
port-channel
followed by a
TenGigabitEthernet
fortyGigE
followed by the