Ip Ssh Rhostsfile - Dell Force10 MXL Blade Reference Manual

Usage
Information
Related
Commands

ip ssh rhostsfile

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Usage
Information
560 | Security
This command specifies the file to be used for the host-based authentication. The file creates/
overwrites the file flash://ADMIN_DIR/ssh/knownhosts and deletes the user specified file. Even
though this is a global configuration command, it does not appear in the running configuration because
this command needs to be run just once.
The file contains the OpenSSH compatible public keys of the host for which host-based authentication
is allowed. An example known host file format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn
WIMPJi0ds= ashwani@poclab4
Note:
For rhostfile
show ip ssh client-pub-keys
Specify the rhost file to be used for host-based authorization.
ip ssh rhostsfile { WORD }
WORD
none
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 29-7. ip ssh rhostsfile Command Example
FTOS#conf
FTOS(conf)# ip ssh rhostsfile flash://shosts
FTOS(conf)#
This command specifies the rhost file to be used for host-based authentication. This file creates/
overwrites the file flash:/ADMIN_DIR/ssh/shosts and deletes the user specified file. Even though this
is a global configuration command, it does not appear in the running configuration because this
command needs to be run just once.
This file contains hostnames and usernames, for which hosts and users, rhost-authentication can be
allowed.
Note:
For rhostfile
and pub-key-file , the administrator must FTP the file to the chassis.
Displays the client-public keys used for the host-based authentication.
Enter the rhost file name for the host-based authentication.
and pub-key-file , the administrator must FTP the file to the switch.