Logging Buffered; Logging Console - Dell Force10 MXL Blade Reference Manual

Related
logging on
Commands
logging trap

logging buffered

Enable logging and specify which messages are logged to an internal buffer. By default, all messages
are logged to the internal buffer.
Syntax logging buffered [ level ] [ size ]
To return to the default values, use the default logging buffered command. To disable logging stored
to an internal buffer, use the no logging buffered command.
Parameters
level
size
Defaults level
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
Information
does not affect messages stored in the buffer.
Related
clear logging
Commands
default logging buffered
show logging

logging console

Specify which messages are logged to the console.
Syntax logging console [ level ]
To return to the default values, use the
console, use the no logging console command.
Parameters
level
Enables the logging asynchronously to logging buffer, console, Syslog server, and
terminal lines.
Enables logging to the Syslog server based on severity.
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging.
Default: 7 or debugging.
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of
messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
= 7; size = 40960 bytes
Introduced on MXL 10/40GbE Switch IO Module
Clears the logging buffer.
Returns the logging buffered parameters to the default setting.
Displays the logging setting and system messages in the internal buffer.
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.
default logging console command. To disable logging to the
Simple Network Management Protocol (SNMP) and Syslog | 597