Ip Rip Receive Version; Ip Rip Send Version - Dell Force10 MXL Blade Reference Manual

Related
ip split-horizon
Commands

ip rip receive version

Set the interface to receive specific versions of RIP. The RIP version you set on the interface overrides
the
Syntax ip rip receive version [ 1 ] [ 2 ]
To return to the default, use the no ip rip receive version command.
Parameters
1
2
Defaults RIPv1 and RIPv2
Command Modes
INTERFACE
Command History
Version 8.3.16.1
Usage Information If you want the interface to receive both versions of RIP, use ip rip receive version 1 2 .
Related

ip rip send version

Commands
version
ip rip send version
Set the interface to send a specific version of RIP. The version you set on the interface overrides the
version
Syntax
ip rip send version [ 1 ] [ 2 ]
To return to the default value, use the no ip rip send version command.
Parameters
1
2
Defaults RIPv1
Command Modes
INTERFACE
Command
Version 8.3.16.1
History
Usage To enable the interface to send both version of RIP packets, use ip rip send version 1 2 .
Information
Sets the RIP routing updates to exclude routing prefixes.
version command in ROUTER RIP mode.
(OPTIONAL) Enter the number
(OPTIONAL) Enter the number
Introduced on MXL 10/40GbE Switch IO Module
command in ROUTER RIP mode.
(OPTIONAL) Enter the number
The default is RIPv1.
(OPTIONAL) Enter the number
Introduced on MXL 10/40GbE Switch IO Module
1
for RIP version 1.
2
for RIP version 2.
Sets the RIP version to be used for sending RIP traffic on an interface.
Sets the RIP version to be used for the switch software.
1
for RIP version 1.
2
for RIP version 2.
Routing Information Protocol (RIP) | 497