Dell Force10 MXL Blade Reference Manual page 351

Figure 18-7. show vlan id Command Example
Figure 18-8. show vlan brief Command Example
FTOS#show vlan brief
VLAN Name
---- -------------------------------- ----
1
2
20
1002
FTOS#
Figure 18-9. Using a VLAN Name Example
FTOSconf)#interface vlan 222
FTOS(conf-if-vl-222)#name test
FTOS(conf-if-vl-222)#do show vlan name test
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
FTOS(conf-if-vl-222)#
FTOS#
Related
vlan-stack compatible
Commands
interface vlan
tagged
Add a Layer 2 interface to a VLAN as a tagged interface.
Syntax tagged interface
To remove a tagged interface from a VLAN, use no tagged interface command.
FTOS# show vlan id 40
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V
- VLT tagged
NUM Status
1 Inactive
FTOS#
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description
222 Inactive
Description
a
STG MAC Aging IP Address
--------- ------------------
0 0
0 0
0 0
0 0
Enables the Stackable VLAN feature on the selected VLAN.
Configures a VLAN.
Q Ports
unassigned
unassigned
unassigned
unassigned
Q Ports
U TenGig 1/22
Layer 2 | 351