Debug Ip Packet - Dell Force10 MXL Blade Reference Manual

Example
Usage
Information

debug ip packet

Syntax
Parameters
Command Mode
Command
History
296 | IPv4 Routing
Figure 15-2. debug ip icmp Command Example (Partial)
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Use the count option to stop packets from flooding the user terminal when debugging is turned on.
View a log of IP packets sent and received.
debug ip packet [ access-group name ] [ count value ] [ interface ]
To disable debugging, use the no debug ip packet [ access-group
command.
access-group name
count value
interface
EXEC Privilege
Version 8.3.16.1
access-group
Enter the keyword
(maximum 16 characters) to limit the debug output based on the defined rules
in the ACL.
(OPTIONAL) Enter the keyword
Range: 1 to 65534
Default: Infinity
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For the management interface, enter the keyword
managementethernet
range is 0 and the port range is 0.
• For a Port Channel interface, enter the keyword
by a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a VLAN, enter the keyword
4094.
Introduced on MXL 10/40GbE Switch IO Module
] [ count
name value
followed by the access list name
count
followed by the count value.
followed by the slot/port information. The slot
port-channel
fortyGigE
vlan
followed by a number from 1 to
] [ interface ]
followed