Show Qos Policy-Map - Dell Force10 MXL Blade Reference Manual

show qos policy-map

View the QoS policy map information.
Syntax show qos policy-map { summary [interface] | detail [ interface]}
Parameters
summary interface
detail interface
Defaults
none
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example 1 Figure 25-2. show qos policy-map detail (IPv4) Command Example
FTOS#show qos policy-map detail tengigabitethernet 0/0
Interface TenGigabitEthernet 4/1
Policy-map-input policy
Trust diffserv
Queue#
FTOS#
Example 2 Figure 25-3. show qos policy-map summary (IPv4) Command Example
FTOS#show qos policy-map summary
Interface
TenGig 4/1
TenGig 4/2
FTOS#
To view a policy map interface summary, enter the keyword
optionally one of the following keywords and slot/port or number information:
•
•
To view a policy map interface in detail, enter the keyword
one of the following keywords and slot/port or number information:
•
•
Introduced on MXL 10/40GbE Switch IO Module
Class-map-name
0 -
1 CM1
2 CM2
3 CM3
policy-map-input
PM1
PM2
For a Forty Gigabit Ethernet interface, enter the keyword
GigabitEthernet
Forty followed by the slot/port information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
For a FortyGigabit Ethernet interface, enter the keyword
GigabitEthernet
Forty followed by the slot/port information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
Qos-policy-name
q0
q1
q2
q3
policy-map-output
PMOut
summary
detail
-
Quality of Service (QoS) | 481
and
and optionally