Defaults
Command Modes
Command
History
Related
Commands
mac access-list extended
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
124
|
Access Control Lists (ACL)
ethertype operator
count
byte
Not configured.
CONFIGURATION-MAC ACCESS LIST-EXTENDED
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
permit
Configures a filter to forward based on MAC addresses.
seq
Configures a filter with specific sequence numbers.
Name a new or existing extended MAC access control list (extended MAC ACL).
mac access-list extended access-list-name
access-list-name
Enter a text string as the MAC access list name, up to 140 characters.
No default configuration
CONFIGURATION
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries
allowed per ACL, refer to your switch documentation.
(OPTIONAL) To filter based on protocol type, enter one of
the following Ethertypes:
ev2
•
- is the Ethernet II frame format.
llc
•
- is the IEEE 802.3 frame format.
snap
•
- is the IEEE 802.3 SNAP frame format.
(OPTIONAL) Enter the keyword
processed by the filter.
(OPTIONAL) Enter the keyword
processed by the filter.
count
to count packets
byte
to count bytes