Snmp Ifmib Ifalias Long; Snmp-Server Community - Dell Force10 MXL Blade Reference Manual

Command Modes
Example
Command
History

snmp ifmib ifalias long

Syntax
Defaults
Command Modes
Command
History
Example

snmp-server community

Syntax
582 | Simple Network Management Protocol (SNMP) and Syslog
EXEC
EXEC Privilege
Figure 31-4. show snmp user Command Example
FTOS#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile
Authentication Protocol: None
Privacy Protocol: None
FTOS#
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Display the entire description string through the Interface MIB, which would be truncated otherwise to
63 characters.
snmp ifmib ifalias long
Interface description truncated beyond 63 characters
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 31-5. snmp ifmib ifalias long Command Example
!------command run on host connected to switch: --------------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a
port connected to
IF-MIB::ifAlias.134792448 = STRING:
!------command run on Dell Force10 switch: --------------!
FTOS#snmp ifmib ifalias long
!------command run on server connected to switch: --------------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a
port connected to Router2. This is a port connected to Router2. This is a port
connected to Router2. This is a port connected to Router2.
IF-MIB::ifAlias.134792448 = STRING:
Configure a new community string access for SNMPv1, v2, and v3.
snmp-server community community-name { ro | rw } [ security-name name ] [ access-list-name ]
To remove access to a community, use the no snmp-server community
[ security-name name ] [access-list-name
active
] command.
{ ro | rw }
community-string