Clear Ip Ospf - Dell Force10 MXL Blade Reference Manual

Related
router ospf
Commands
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
Syntax
auto-cost [ reference-bandwidth ref-bw ]
To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost
[ reference-bandwidth ] command.
Parameters
ref-bw
Defaults
100 megabits per second.
Command Modes ROUTER OSPF
Command
Version 8.3.16.1
History

clear ip ospf

Clear all OSPF routing tables.
Syntax clear ip ospf process-id [ process ]
Parameters
process-id
process
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Enters the ROUTER OSPF mode to configure an OSPF instance.
(OPTIONAL) Specify a reference bandwidth in megabits per second.
Range: 1 to 4294967
Default: 100 megabits per second.
Introduced on MXL 10/40GbE Switch IO Module
Enter the OSPF Process ID to clear a specific process.
If no Process ID is entered, all OSPF processes are cleared.
(OPTIONAL) Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
process
to reset the OSPF process.
Open Shortest Path First (OSPFv2) | 389