Aaa Authorization Exec - Dell Force10 MXL Blade Reference Manual

aaa authorization exec

Syntax
Parameters
Defaults
Command Modes
Command
History
privilege level (CONFIGURATION mode)
Syntax
Parameters
Defaults
Command Modes
536 | Security
Set parameters that restrict (or permit) a user's access to EXEC-level commands.
aaa authorization exec { name
To disable authorization checking for EXEC level commands, use the
command.
name
default
local
tacacs+
none
none
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Change the access or privilege level of one or more commands.
privilege mode { level level command
To delete access to a level and command, use the
mode Enter one of the following keywords as the mode for which you are controlling access:
configure
•
exec
•
interface
•
line
•
route-map
•
router
•
level level
Enter the keyword
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes and commands.
reset
Enter the keyword
command
Enter the command's keywords to assign the command to a certain access level. You can
enter one or all of the keywords
Not configured.
CONFIGURATION
| default } { local || tacacs+
Define a name for the list of authorization methods.
Define the default list of authorization methods.
Use the authorization parameters on the system to perform authorization.
Use the TACACS+ protocol to perform authorization.
Enter this keyword to apply no authorization.
| reset command
no privilege mode level level command
for the CONFIGURATION mode
for the EXEC mode
for the INTERFACE modes
for the LINE mode
for the ROUTE-MAP
for the ROUTER OSPF, ROUTER RIP, and ROUTER BGP modes.
level
followed by a number for the access level.
reset
to return the security level to the default setting.
|| if-authenticated || none
no aaa authorization exec
}
}
command.