Ets Commands; Dcbx Commands - Dell Force10 MXL Blade Reference Manual

ETS Commands

DCBX Commands

advertise dcbx-appln-tlv
Syntax
Parameters
Defaults
Command Modes
154 | Data Center Bridging
• bandwidth-percentage
• dcb-output
• dcb-policy output
• dcb-policy output stack-unit stack-ports all
• description
• ets mode on
• priority-list
• priority-group
• priority-group qos-policy
• qos-policy-output ets
• scheduler
• set-pgid
• show interface ets
• show qos dcb-output
• show stack-unit stack-ports ets detail
• advertise dcbx-appln-tlv
• advertise dcbx-tlv
• dcbx version
• dcbx port-role
• fcoe priority-bits
• iscsi priority-bits
• debug dcbx
• show interface dcbx detail
On a DCBX port with a manual role, configure the application priority TLVs advertised on the
interface to DCBX peers.
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the
{fcoe | iscsi}
Application priority TLVS are enabled to advertise FCoE and iSCSI.
PROTOCOL LLDP
no advertise dcbx-appln-tlv {fcoe | iscsi}
Enter the application priority TLVs, where:
fcoe
• : enables the advertisement of FCoE in application priority TLVs.
iscsi
• : enables the advertisement of iSCSI in application priority TLVs.
command.