Dell Force10 MXL Blade Reference Manual page 644

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

System Time and Date

Figure 35-7. show ntp status Command Example

FTOS#show ntp status

Clock is unsynchronized, stratum 16, no reference clock

frequency is 0.000 ppm, stability is 0.000 ppm, precision is 4294967279

reference time is 00000000.00000000 (6:28:16.000 UTC Thu Feb 7 2036)

clock offset is 0.000000 msec, root delay is 0.00000 sec

root dispersion is 0.00000 sec, peer dispersion is 0.000 msec

peer mode is unspec

Table 35-2. show ntp status Command Description

"Clock is..."

"frequency is..."

"reference time is..."

"clock offset is..."

"root dispersion is..."

"peer mode is..."

show ntp associations

States whether or not the switch clock is synchronized, which NTP

stratum the system is assigned and the IP address of the NTP peer.

Displays the frequency (in ppm), stability (in ppm) and precision

(in Hertz) of the clock in this system.

Displays the reference time stamp.

Displays the system offset to the synchronized peer and the time

delay on the path to the NTP root clock.

Displays the root and path dispersion.

State what NTP mode the switch is. This should be client mode.

Displays information on the NTP Master and Peer configurations.