Clear Ip Route; Clear Tcp Statistics - Dell Force10 MXL Blade Reference Manual

clear ip fib stack-unit
Clear all forwarding information base (fib) entries in the specified stack unit (use this command with
caution, refer to
Syntax clear ip fib stack-unit unit-number
Parameters
unit-number
Command Mode
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Usage Use this command to clear Layer 3 CAM inconsistencies.
Information
Related
show ip fib stack-unit
Commands

clear ip route

Clear one or all routes in the routing table.
Syntax clear ip route {* | ip-address mask }
Parameters
*
ip-address mask
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Related
ip route
Commands
show ip route
show ip route summary

clear tcp statistics

Clear TCP counters.
Syntax clear tcp statistics
Usage Information).
Enter the stack-unit number.
Range: 0 to 5
Introduced on MXL 10/40GbE Switch IO Module
Caution:
Executing this command causes traffic disruption.
Shows the FIB entries.
Introduced on MXL 10/40GbE Switch IO Module
*
Enter an asterisk ( ) to clear all learned IP routes.
Enter a specific IP address and mask in dotted decimal format to clear
that IP address from the routing table.
Assigns an IP route to the switch.
Views the routing table.
Views a summary of the routing table.
IPv4 Routing | 293