Show Config; Set Tag; Show Route-Map - Dell Force10 MXL Blade Reference Manual

set tag

Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands

show config

Syntax
Command Modes
Command
History
Example

show route-map

Syntax
Parameters
Command Modes
Command
History
140 | Access Control Lists (ACL)
Configure a filter to specify a tag for redistributed routes.
set tag tag-value
tag-value Enter a number as the tag.
Range: zero (0) to 4294967295.
Not configured
ROUTE-MAP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
set automatic-tag Computes the tag value of the route.
set metric Specifies the metric value assigned to redistributed routes.
set metric-type Specifies the route type assigned to redistributed routes.
Display the current route map configuration.
show config
ROUTE-MAP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 6-13. show config Command Example
FTOS(conf-route-map)#show config
!
route-map hopper permit 10
FTOS(conf-route-map)#
Display the current route map configurations.
show route-map [ map-name ]
map-name
(OPTIONAL) Enter the name of a configured route map, up to 140 characters.
EXEC
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module