Show Interfaces Dampening - Dell Force10 MXL Blade Reference Manual

show interfaces dampening

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
FTOS#show interfaces dampening
Interface
tengig 3/2
tengig 3/10
FTOS#
Related
Commands
264 | Interfaces
Display interface dampening information.
show interfaces dampening [[ interface ] [ summary ] [ detail ]]
interface
summary
detail
none
EXEC
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 14-32. show interfaces dampening Command Example
Supp Flaps
State
Up 0
Up 0
dampening
show interfaces
show interfaces configured
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keyword
by a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
(OPTIONAL) Enter the keyword
of dampening data, including the number of interfaces configured and the
number of interfaces suppressed, if any.
(OPTIONAL) Enter the keyword
dampening data.
Penalty Half-Life
0 20
0 5
Configures dampening on an interface
Displays information on a specific physical interface or virtual interface.
Displays any interface with a non-default configuration.
port-channel
fortyGigE
summary
to display the current summary
detail
to display detailed interface
Reuse Suppress Max-Sup
800 4500
750 2500
followed
120
20