Dell Force10 MXL Blade Reference Manual page 214

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

show fip-snooping system

Command Mode

FIP Snooping

Table 11-4. show fip-snooping statistics Command Fields Description (continued)

Number of FLOGI Accepts

Number of FLOGI Rejects

Number of FDISC Accepts

Number of FDISC Rejects

Number of FLOGO Accepts

Number of FLOGO Rejects

Number of CVLs

Number of FCF Discovery

Number of VN Port Session

Number of Session failures due to

Hardware Config

Display information on the status of FIP snooping on the switch (enabled or disabled), including the

number of FCoE VLANs, FCFs, ENodes, and currently active sessions.

show fip-snooping system

EXEC Privilege

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Figure 11-7. show fip-snooping system Command Example

FTOS# show fip-snooping system

FCOE VLAN List (Operational)

Number of FIP FLOGI accept frames received on the interface

Number of FIP FLOGI reject frames received on the interface

Number of FIP FDISC accept frames received on the interface

Number of FIP FDISC reject frames received on the interface

Number of FIP FLOGO accept frames received on the interface

Number of FIP FLOGO reject frames received on the interface

Number of FIP clear virtual link frames received on the

Number of FCF discovery timeouts that occurred on the

Number of VN port session timeouts that occurred on the

Number of session failures due to hardware configuration that

occurred on the interface