Protocol Spanning-Tree Rstp - Dell Force10 MXL Blade Reference Manual

Command Modes CONFIGURATION RSTP (conf-rstp)
Command
Version 8.3.16.1
History
Related
max-age
Commands
hello-time
edge-port bpdufilter default
Enable BPDU Filter globally to filter transmission of BPDU on port fast enabled interfaces.
Syntax edge-port bpdufilter default
To disable global bpdu filter default, use the no edge-port bpdufilter default command.
Defaults
Disabled
Command Modes CONFIGURATION (conf-rstp)
Command
History
Version 8.3.16.1

protocol spanning-tree rstp

Enter the RSTP mode to configure RSTP.
Syntax protocol spanning-tree rstp
To exit the RSTP mode, use the exit command.
Defaults Not configured
Command Modes
CONFIGURATION RSTP (conf-rstp)
Command
Version 8.3.16.1
History
Example Figure 28-2. protocol spanning-tree rstp Command Example
FTOS(conf)#protocol spanning-tree rstp
FTOS(conf-rstp)##no disable
Usage
RSTP is not enabled when you enter RSTP mode. To enable RSTP globally on the system, use the
Information
description
Related
description
Commands
Introduced on MXL 10/40GbE Switch IO Module
Changes the wait time before RSTP transitions to the Forwarding state.
Changes the time interval between BPDUs.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
command from RSTP mode.
Disable RSTP globally on the system.
Rapid Spanning Tree Protocol (RSTP) | 523
no