Redistribute Ospf; Router Rip - Dell Force10 MXL Blade Reference Manual

Related
Commands

redistribute ospf

Syntax
Parameters
Defaults
Command Modes
Command History

router rip

Syntax
Defaults
Command Modes
Command
History
Usage
Information
502 | Routing Information Protocol (RIP)
default-information originate
Redistribute routing information from an OSPF process.
redistribute ospf process-id [ match external { 1 | 2 } | match internal | metric metric-value ]
[ route-map map-name ]
To disable redistribution, use the no redistribute ospf
internal | metric metric-value ] [ route-map map-name ] command.
process-id
Enter a number that corresponds to the OSPF process ID to be redistributed.
Range: 1 to 65355.
match external 1
{ | (OPTIONAL) Enter the keywords
2
} 2 to indicated that external 1 routes or external 2 routes should be redistributed.
match internal
(OPTIONAL) Enter the keywords
should be redistributed.
metric metric-value
(OPTIONAL) Enter the keyword
Range: 0 to 16
route-map
(OPTIONAL) Enter the keyword
map-name
configured route map.
Not configured.
ROUTER RIP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Enter ROUTER RIP mode to configure and enable RIP.
router rip
To disable RIP, use the no router rip command.
Disabled.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
To enable RIP, you must assign a network address using the
Generates a default route for RIP traffic.
process-id
match external
match internal
metric
followed by a number as the metric value.
route-map
network
[ match external { 1 | 2 } | match
followed by the numbers 1 or
to indicate that internal routes
followed by the name of a
command.