Ip Ftp Password; Ip Ftp Source-Interface - Dell Force10 MXL Blade Reference Manual

Usage The hostname is used in the prompt.
Information

ip ftp password

Specify a password for outgoing FTP connections.
Syntax ip ftp password [ encryption-type ] password
Parameters
encryption-type
password
Defaults Not configured.
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage The password is listed in the configuration file; you can view the password using the show
Information
running-config ftp command in EXEC mode.
Use the password configured by the
copy command.
Related
copy
Commands
ip ftp username

ip ftp source-interface

Specify an interface's IP address as the source IP address for FTP connections.
Syntax
ip ftp source-interface interface
Parameters
interface
Defaults
The IP address on the system that is closest to the Telnet address is used in the outgoing packets.
(OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password
Enter a string up to 40 characters as the password.
Introduced on MXL 10/40GbE Switch IO Module
ip ftp password
Copies the files.
Sets the user name for the FTP sessions.
Enter the following keywords and slot/port or number information:
• For Loopback interfaces, enter the keyword
zero (0) to 16383.
• For a Port Channel interface, enter the keyword
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
• For a VLAN interface, enter the keyword
command when you use the ftp: parameter in the
loopback
followed by a number from
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1 to 4094.
Control and Monitoring | 49
followed by a number:
followed by the