Dell Force10 MXL Blade Reference Manual page 240

description
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
duplex (1000/10000 Interfaces)
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
240 | Interfaces
Assign a descriptive text string to the interface.
description desc_text
To delete a description, enter no description .
desc_text
Enter a text string up to 240 characters long.
No description is defined.
INTERFACE
Version 8.3.16.1
• Spaces between characters are not preserved after entering this command unless you enclose the
entire description in quotation marks ("
• Entering a text string after the
as the description.
• The shutdown and description
interface that is a member of a port-channel.
• Use the show interfaces description
interface.
show interfaces description
Configure duplex mode on any physical interfaces where the speed is set to 1000/10000.
duplex { half | full }
To return to the default setting, use the no duplex command.
half
Enter the keyword
full
Enter the keyword
Not configured
INTERFACE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
This command applies to any physical interface with speed set to 1000/10000.
Note:
Starting with FTOS 7.8.1.0, when a copper SFP2 module with catalog number
GP-SFP2-1T is used, its speed can be manually set with the speed command. When the speed
is set to 10 or 100 Mbps, the duplex command can also be executed.
Introduced on MXL 10/40GbE Switch IO Module
desc_text ").
description command overwrites any previous text string configured
commands are the only commands that you can configure on an
command to display descriptions configured for each
Displays the
description field of interfaces.
half
to set the physical interface to transmit only in one direction.
full
to set the physical interface to transmit in both directions.