Important Points To Remember; Show Snmp; Show Snmp Engineid - Dell Force10 MXL Blade Reference Manual

Important Points to Remember

show snmp

Syntax
Command Modes
Command
History
Example
Related
Commands

show snmp engineID

Syntax
580 | Simple Network Management Protocol (SNMP) and Syslog
• Typically, 5-second timeout and 3-second retry values on an SNMP server are sufficient for both
local area network (LAN) and wide area network (WAN) applications. If you experience a timeout
with these values, the recommended best practice on Dell Force10 switches (to accommodate their
high port density) is to increase the timeout and retry values on your SNMP server to the
following:
— SNMP Timeout—greater than 3 seconds
— SNMP Retry count—greater than 2 seconds
• If you are using access control lists (ACLs) in SNMP v3 configuration, group ACL overrides user
ACL if the user is part of that group.
• SNMP operations are not supported on a virtual LAN (VLAN).
Display the status of SNMP network elements.
show snmp
EXEC
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 31-1. show snmp Command Example
FTOS#show snmp
32685 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
96988 Number of requested variables
0 Number of altered variables
31681 Get-request PDUs
968 Get-next PDUs
0 Set-request PDUs
61727 SNMP packets output
0 Too big errors (Maximum packet size 1500)
9 No such name errors
0 Bad values errors
0 General errors
32649 Response PDUs
29078 Trap PDUs
FTOS#
snmp-server community
Display the identification of the local SNMP engine and all remote engines that are configured on the
router.
show snmp engineID
Enables SNMP and set community string.