Show Ip Ospf Database Summary - Dell Force10 MXL Blade Reference Manual

Table 21-8. show ip ospf process-id database router Command Description
Item
LS Seq Number
Checksum
Length
Number of Links
Link connected to:
(Link ID)
(Link Data)
Number of TOS Metric
TOS 0 Metric
Related
show ip ospf database
Commands

show ip ospf database summary

Display the network summary (type 3) LSA routing information.
Syntax show ip ospf process-id database summary [ link-state-id ] [ adv-router ip-address ]
Parameters
process-id
link-state-id
adv-router
ip-address
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Description
Displays the link state sequence number. This number detects duplicate or old
LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the number of active links to the type of router (Area Border Router or
AS Boundary Router) listed in the previous line.
Identifies the type of network to which the router is connected.
Identifies the link type and address.
Identifies the router interface address.
Lists the number of TOS metrics.
Lists the number of TOS 0 metrics.
Displays OSPF database information.
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords
information about that router.
Introduced on MXL 10/40GbE Switch IO Module
adv-router
ip-address to display only the LSA
Open Shortest Path First (OSPFv2) | 421