Using The "Show Policy-Map" Command - Dell Force10 S2410-01-10GE-24P Configuration Manual

Policy Attribute Table Size—The current number of entries (rows) in the Policy Attribute Table.
Policy Attribute Table Max—The maximum allowed entries (rows) for the Policy Attribute Table.
Service Table Size—The current number of entries (rows) in the Service Table.
Service Table Max—The maximum allowed entries (rows) for the Service Table.
The following examples show sample output from the
commands.
Figure 12-144. Using the show diffserv Command
Force10 #show diffserv
DiffServ Admin mode............................ Enable
Class Table Size Current/Max................... 3 / 25
Class Rule Table Size Current/Max.............. 4 / 150
Policy Table Size Current/Max.................. 1 / 64
Policy Instance Table Size Current/Max......... 2 / 576
Policy Attribute Table Size Current/Max........ 2 / 1728
Service Table Size Current/Max................. 48 / 400
Figure 12-145. Using the show diffserv service brief Command
Force10 #show diffserv service brief
DiffServ Admin mode............................ Enable
Interface Direction
----------- ----------- ---------- -------------------------------
1/0/1 In
1/0/2 In
1/0/3 In
!-------------output deleted---------!

Using the "show policy-map" Command

The command displays all configuration information for the specified policy.
Command Syntax
show policy-map [
policyname
]
interface
The following values can be displayed:
Assign Queue—Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to the class.
Conform CoS—The action to be taken on conforming packets per the policing metrics.
Conform Secondary CoS—The action to be taken on packets conforming with the secondary class of service
value per the policing metrics.
OperStatus
Up pm-1
Down pm-1
Down pm-1
Command Mode
| Policy Class
show diffserv and
Policy Name
Usage
This command displays all configuration information for
the specified policy. The
existing DiffServ policy. The
interface.
show diffserv service brief
is the name of an
policyname
interface is an existing
Quality of Service | 187