Show Monitor Session; Show Port - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example Figure 6-32. Command Example: show mac-address-table stats
Force10 #show mac-address-table stats
Max MFDB Table Entries......................... 256
Most MFDB Entries Since Last Reset............. 0
Current Entries................................ 0
Related show mac-address-table
Commands multicast

show monitor session

This command displays the port monitoring information for the system.
show monitor session 1
Syntax
Mode
Privileged Exec
Example Figure 6-33. Command Example: show monitor session 1
Force10 #show monitor session 1
Session ID
----------
1
Session ID—In all released versions of SFTOS, the session is always 1.
Report Fields
Admin Mode—Indicates whether the Port Mirroring feature is enabled or disabled. The possible values
are Enable and Disable.
Probe Port
mirroring). If this value has not been configured, 'Not Configured' will be displayed.
Mirrored Port
port). If this value has not been configured, 'Not Configured' will be displayed.
Related
monitor session
Commands
monitor session 1 mode

show port

This command displays port information for a selected port or for all ports.
show port {unit/slot/port | all}
Syntax
Displays the Multicast Forwarding Database (MFDB)
information
Admin Mode Probe Port
---------- ----------
Enable 2/0/26
—The
unit/slot/port unit/slot/port
—The
unit/slot/port unit/slot/port
Adds a mirrored port (source port) or probe port (destination port) to a
session identified with the session ID of 1.
Sets the monitor session (port monitoring) mode to enabled.
Mirrored Port
-------------
1/0/1
configured as the probe port (destination port for
configured as the monitored port (source port, mirrored
System Configuration Commands | 101