Rack Rail Specifications; Usb Peripherals; Pcie Card Dimensions; Table 32. Rail Adjustability Range - Dell PowerEdge R630 Technical Manual

Rack rail specifications

Table 32 lists the spacing dimensions for the R630 sliding and statics rails.
Rail
Product
identifier
A7
R630
A8
1
For 8-drive bay chassis
2
For 10-drive and 24-drive bay chassis
The adjustment range of the rails is a function of the type of rack in which they are being mounted.
The min-max values listed above represent the allowable distance between the front and rear
mounting flanges in the rack. Rail depth without the CMA represents the minimum depth of the rails
with the outer CMA brackets removed (if applicable) as measured from the front mounting flanges
of the rack.
The rail depth changes based on which version of the R630 is being installed. Although the 10-drive
and 24-drive bay system is 50 mm deeper than the 8-drive bay system, both are able to share the
same rails through a new self-adjusting feature included on the rails.

USB peripherals

USB peripherals are supported through the front and back USB ports on the R630. The front ports
are USB 2.0 compliant and the back ports are USB 3.0 compliant.

PCIe card dimensions

Table 33 provides the dimensions of the PCIe cards supported by the R630.
Type
Full-height, half-length card
Full-height, full-length card
Low-profile, half-height card
Note: ¾-length is 234mm (9.213 inches)
52 PowerEdge R630 Technical Guide
Table 32. Rail adjustability range
Rail adjustability range (mm)
Rail type Square
Min Max
Sliding 681 868
Static 608 879
Table 33. PCIe card dimensions
Height
111.15 mm (4.376 inches) max
111.15 mm (4.376 inches) max
68.90 mm (2.731 inches) max
Round Threaded
Min Max Min Max
667 861 681 883
594 872 604 890
Length
167.65 mm (6.600 inches) max
312.00 mm (12.283 inches) max
167.65 mm (6.600 inches) max
Rail depth (mm)
without with
CMA CMA
1 1
720 845
2 2
770 895
622 —