Power Supply Specifications; Rack Rail Specifications; Table 31. Power Supply Specifications; Table 32. Rail Adjustability Range - Dell PowerEdge T620 Technical Manual

Maximum shock
Operating Half sine shock in all operational orientations of 31G +/– 5% with a pulse duration of 2.6ms
+/– 10%
Storage Half sine shock on all six sides of 71G +/– 5% with a pulse duration of 2ms +/–10%; square
wave shock on all six sides of 27G with velocity change at 235 in/sec or greater
Altitude
Operating –15.2m to 3048m (–50 ft to 10,000 ft)
Storage –15.2m to 12,000m (–50 ft to 39,370 ft)
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985

Power supply specifications

Table 31 lists power supply specifications for the PowerEdge T620.
Specification
Current
consumption
Supply voltage
Frequency
Heat dissipation
(BTU/hr max)
Maximum inrush
4
current
1
Auto-ranging
4
Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55A per
power supply for 10ms or less.

Rack rail specifications

Table 32 lists the spacing dimensions for the T620 sliding rails.
Rail
System
Identifier
T620 C2
52
PowerEdge T620 Technical Guide
Table 31. Power supply specifications
1100W DC
32A
-48V to -60V DC 100–240VAC
N/A
4416
55A
Table 32. Rail adjustability range
Rail Type
Sliding
750W AC
1100W AC
Titanium
12–6.5A 10–5A
1
200–240VAC
50/60Hz 50/60Hz
2843
4100
55A 55A
Rail Adjustability Range (mm)
Square Round
Min Max Min Max
686 756 672 749
750W AC
495W AC
Platinum
10–5A 6.5–3A
1
100–240VAC 100–240VAC
50/60Hz 50/60Hz
2891
55A
Rail Depth (mm)
Threaded
without
CMA
Min Max
686 771 760
1
1908
55A
with
CMA
840