configure ospfv3 import-policy
configure ospfv3 {domain <domainName>} import-policy [<policy-map> | none]
Description
Associates or removes the policy applied to OSPFv3 routes added to the system routing table.
Syntax Description
domainName
policy-map
none
Default
No policy.
Usage Guidelines
Use this command to associate a policy with the OSPFv3 routes installed into the system table. Use the
option to remove the policy association. The import policy cannot be used to filter routes from
none
being added to the routing table. It can only be used to change the attributes of routes.
Policy files for this command will only recognize the following policy attributes:
Match attributes
●
nlri <IPv6-address>/<mask-len>
■
route-origin [ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra]
■
Action (set) attributes
●
cost <cost>
■
tag <number>
■
Any other policy attribute will not be recognized and will be ignored.
Example
The following example applies the policy campuseast to OSPFv3 routes:
configure ospfv3 import-policy campuseast
History
This command was first available in ExtremeWare XOS 11.2.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies the policy to apply.
Specifies to remove any policy previously applied.
configure ospfv3 import-policy
1373