Show Netlogin - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Network Login Commands

show netlogin

show netlogin {port <portlist> vlan <vlan_name>} {dot1x {detail}} {mac}
{web-based}
Description
Shows status information for Network Login.
Syntax Description
portlist
vlan_name
dot1x
mac
web-based
detail
Default
N/A.
Usage Guidelines
The information reported by this command is the following:
Whether network login is enabled or disabled.
●
The base-URL.
●
The default redirect page.
●
The logout privileges setting.
●
The netlogin session-refresh setting and time.
●
The MAC and IP address of supplicants.
●
The type of authentication, 802.1x, MAC-based, or HTTP (web-based).
●
The guest VLAN configurations, if applicable.
●
If you do not specify the authentication type, all will be displayed.
Example
The following command shows the summary network login information:
show netlogin
1090
Specifies one or more ports or slots and ports.
Specifies the name of a VLAN.
Specifies 802.1x information.
Specifies MAC-based information.
Specifies web-based information.
Shows detailed information.
ExtremeWare XOS 11.5 Command Reference Guide