Udp-Port; Operational Commands For Sflow Technology - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

udp-port

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

Operational Commands for sFlow Technology

Copyright © 2010, Juniper Networks, Inc.
udp-port port-number;
[edit protocols sflow collector]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure the UDP port for a remote collector for sFlow network traffic monitoring. The
switch sends sFlow UDP datagrams to the collector for analysis.
port-number —UDP port number for this collector.
Default: 6343
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
Chapter 139: sFlow Monitoring Technology
3893