Mpls Topology-Driven-Lsp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls topology-driven-lsp

[ no ] mpls topology-driven-lsp
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables topology-driven LSP creation on the virtual router where the LSR automatically
Description
creates LSPs when it learns a new IGP route. In the context of the VRF virtual router,
enables carrier-of-carriers support on the provider carrier's PE router.
The router advertises labels for new routes immediately to all peers without waiting
for a label request message from an upstream peer or a label mapping message from
a downstream peer. This mode is downstream-unsolicited, independent control.
The no version disables topology-driven LSPs on the virtual router.
Global Configuration
Mode
1402
mpls topology-driven-lsp