Table 252: Show (Ospf | Ospf3) Route Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Required Privilege
Level
List of Sample Output
Output Fields

Table 252: show (ospf | ospf3) route Output Fields

Field Name Field Description
Name of the topology.
Topology
Destination of the route.
Prefix
How the route was learned:
Path type
Inter
Ext1
Ext2
Intra
The type of routing device from which the route was learned:
Route type
AS BR
Area BR
Area/AS BR
Network
Router
Transit
LAN, or nonbroadcast multiaccess (NBMA) link.
Discard
Next-hop type:
NH Type
Route's metric value.
Metric
(OSPFv3 only) Interface through which the route's next hop is reachable.
NH-interface
Copyright © 2010, Juniper Networks, Inc.
the option to specify an address family for OSPFv3 other than IPv6 unicast,
realm
which is the default.
router —(Optional) Display routes to all routers.
—(OSPF only) (Optional) Display routes for a particular topology.
topology topology-name
transit —(Optional) (OSPFv3 only) Display OSPFv3 routes to pseudonodes.
view
show ospf route on page 2058
show ospf route detail on page 2058
show ospf3 route on page 2059
show ospf3 route detail on page 2059
show ospf route topology voice on page 2060
Table 252 on page 2057 list the output fields for the
Output fields are listed in the approximate order in which they appear.
—Interarea route
—External type 1 route
—External type 2 route
—Intra-area route
—Route to AS border router
—Route to area border router
—Route to router that is both an
—Network router.
—Route to a router that is neither an
—(OSPFv3 only) Route to a pseudonode representing a transit network,
—Route to a summary discard.
or .
LSP IP
Chapter 74: Operational Commands for Layer 3 Protocols
show (ospf | ospf3) route
Area BR and AS BR .
nor an .
Area BR AS BR
command.
Output Level
All levels
All levels
All levels
All levels
All levels
All levels
All levels
2057