L3-Interface - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

l3-interface

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1444
®
OS for EX Series Ethernet Switches, Release 10.3
l3-interface vlan.logical-interface-number;
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Associate a Layer 3 interface with the VLAN. Configure Layer 3 interfaces on trunk ports
to allow the interface to transfer traffic between multiple VLANs. Within a VLAN, traffic
is bridged, while across VLANs, traffic is routed.
No Layer 3 (routing) interface is associated with the VLAN.
vlan.logical-interface-number
command. For the logical interface number, use the same number
interfaces vlan unit
you configure in the unit
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show ethernet-switching interfaces on page 1235
show vlans on page 1507
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1305
Example: Connecting an Access Switch to a Distribution Switch on page 1320
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1379
Understanding Bridging and VLANs on EX Series Switches on page 1283
—Number of the logical interface defined with a
statement.
Copyright © 2010, Juniper Networks, Inc.
set