Dot1Q-Tunneling (Vlans) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

dot1q-tunneling (VLANs)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
dot1q-tunneling {
customer-vlans (id | native | range);
layer2-protocol-tunneling all | protocol-name {
drop-threshold number;
shutdown-threshold number;
}
}
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option introduced in Junos OS Release 9.6 for EX Series switches.
native
Options layer2-protocol-tunneling
in Junos OS Release 10.0 for EX Series switches.
Enable Q-in-Q tunneling on the specified VLAN.
NOTE: The VLAN on which you enable Q-in-Q tunneling must be a tagged
VLAN.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
dot1q-tunneling on page 1428
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1347
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1368
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1386
Understanding Q-in-Q Tunneling on EX Series Switches on page 1293
Chapter 62: Configuration Statements for Bridging and VLANs
, drop-threshold , and shutdown-threshold introduced
1429