Configuring Virtual Lans; Configuring Vlans (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual

CHAPTER 11

Configuring Virtual LANs

Configuring VLANs (NSM Procedure)

Table 85: VLAN Edit Settings
Option Description
Vlan Name Specifies a unique name for the VLAN.
Copyright © 2010, Juniper Networks, Inc.
This section contains the following:
Configuring VLANs (NSM Procedure) on page 147
EX-series switches use bridging and virtual LANs (VLANs) to connect network devices
in a LAN—desktop computers, IP telephones, printers, file servers, wireless access points,
and others—and to segment the LAN into smaller bridging domains.
To configure a VLAN:
In the navigation tree, select Device Manager > Devices. In Device Manager, select
1.
the device for which you want to configure VLANs.
In the Configuration tree, expand Vlans.
2.
Select Vlan.
3.
In the VLAN screen, click the add or edit icon.
4.
Add/modify VLAN settings as specified in Table 85 on page 147
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See Updating
Devices for more information.
Your Action
Enter a name.
147