Setting Operation - YASKAWA NX100 Instructions Manual

Setting Operation

Operation
1 Select {ROBOT} under the
main menu.
2 Select {INTERFERENCE}.
3 Select the desired cube num-
ber.
4 Select "METHOD".
The INTERFERENCE AREA window is shown.
DATA EDIT
INTERFERENCE AREA
INTERFERENCE SIGNAL : 1 / 32
METHOD
CONTROL GROUP
CHECK MEASURE
Main Menu Short Cut
Select the desired cube number with the page key
number input.
When selecting the cube number by number input, click on
{PAGE} to input the desired signal number.
DATA EDIT
INTERFERENCE AREA
INTERFERENCE SIGNAL : 1 / 32
METHOD
CONTROL GROUP
CHECK MEASURE
Main Menu Short Cut
"AXIS INTERFERENCE" and "CUBIC INTERFERENCE" are dis-
played alternately every time [SELECT] is pressed. If "CUBIC
INTERFERENCE" is selected, the window is changed.
DATA EDIT
INTERFERENCE AREA
INTERFERENCE SIGNAL : 1 / 32
METHOD
CONTROL GROUP
CHECK MEASURE
8-51
8.6 Interference Area
Explanation
DISPLAY UTILITY
AXIS INTERFERENCE
COMMAND POSITION
PAGE
DISPLAY UTILITY
AXIS INTERFERENCE
COMMAND POSITION
Interf._signal_no.=
PAGE
DISPLAY UTILITY
CUBIC INTERFERENCE
COMMAND POSITION
GO BACK
or by
PAGE