07/11/02 09:38:47 61TA0000_220_0279
Power Windows
Driver's Power Window Motor Test
Motor Test
1. Remove the power window master switch
(see page 22-283).
2. Test the motor in each direction by connecting
battery power and ground to the power window
master switch 37P connector (A) according to the
table.
*01
Direction
4-door
*02
22-276
Terminal
12
UP
DOWN
A
Wire side of female terminals
2-door
24
Wire side of female terminals
3. If the motor does not run or fails to run smoothly,
go to step 4, if the motor runs smoothly, go to step
8.
4. For 4-door models: Remove the door panel
(see page 20-16).
5. Disconnect the 6P connector (A) from the driver's
power window motor (B).
TA08A00J54460647101FEAT00
A
B
*03
*04